Step-By-Step Guide - Mastering Your New Shower Unit Installation

This Post



We've encountered the article pertaining to Simple ways to Install a Shower Cubicle on Your Own below on the internet and accepted it made perfect sense to discuss it with you on this page.


How to Install a Direct-to-Stud Shower Enclosure
An effective shower installment calls for mindful preparation as well as a great deal of job. Most of the times, you will need to do three kinds of jobs: mounting wall surfaces, mounting the plumbing, and also ending up wall surfaces.

Prep work


To start with, you have to decide on the sort of shower that you want to install. It is important to ascertain whether the picked shower can dealing with particular systems and also can manage a secure degree of water via the central heating boiler. A lot of shower systems nowadays are created to be versatile to different water pressures (such as saved warm water as well as chilly mains).
It is also important to take into account the water pressure and also the preparation of the piping and also drain for the shower

Different Sorts Of Shower Units


  • Push-on Mixer: The pipe as well as spray parts of the push-on mixer shower system can be connected to the bath faucet according to your requirement, and the water temperature level can be readjusted by means of the faucets. Push-on mixers are cheap as well as incredibly easy to install. Nonetheless, although the tube link is easy, it is easily displaced. In addition, it is troublesome to adjust the temperature level.

  • Bath/Shower Mixer: The hose pipe and spray of this sort of shower are integrated with a bath mixer faucet, and also the temperature can be adjusted via the bath taps. It is a really inexpensive alternative as well as no extra plumbing is entailed. Nevertheless, the bath/shower mixers also experience troublesome temperature level control choices.

  • Handbook Mixer: The hose as well as spray of a manual mixer shower system are a part of the wall surface unit and also the hot and cold water materials are linked to a single shutoff The temperature and also pressure of the water are regulated with either one or a range of handles (in a lot more expensive showers). Although temperature control is a lot easier in manual mixer kinds, they are much more pricey than the previously stated mixers. They likewise call for extra plumbing of hot and cold water supply pipelines.

  • Thermostatic Mixer: The hose pipe and also spray of this shower type belong of the wall system and the hot and cold water products are connected to a solitary shutoff right here also. It is complete with an integrated stabiliser to self-adjust the water temperature level and to avoid it from becoming as well warm. One of the greatest benefits of a thermostatic mixer shower type consists of practical temperature level control. However, it is one of the most pricey of the different mixer choices.

  • Power Shower: A power shower is a solitary unit consisting of an effective electric pump that can modifying both the water stress and also temperature. This kind of shower can be fitted if there is water from a cold water cistern as well as a warm water cyndrical tube. A power shower makes the adjustment of both pressure and also temperature level easy. On the other hand, it is unsuitable for water heated straight by the shower or where the water is provided by a mix boiler under mains stress.

  • Electric Shower: An electrical shower is plumbed right into a mains cold water supply as well as it heats up the water electrically. It is necessary to note that for this shower kind to be installed, the keys stress needs to be at least 0.7 kg/sq cm (10lb/sq in). The system enables the temperature level and also pressure to be adjusted using a handle. Models with temperature stabilisers are better as they stay untouched by various other faucets elsewhere being used within the family. A significant downside of electrical showers is that the control handle just enables the option of heats at less pressure, or lower temperature levels at a better stress. This is problematic in the winter season when the spray is typically weak as well as the keys water is cooler. Nonetheless, this problem is tackled in some designs which are available with a winter/summer setting.


  • Method


    Depending on the type of shower you want to set up, the shower head need to either be suited order to prevent its contact with the water in the bathroom listed below or the base tray, or it must have a check valve.
    Prior to beginning, it is suggested to note the placements of the shower head and also control, as well as to prepare the pipe-work included. Furthermore, the drain system to remove the waste water will require to be prepared. Both positions of the cable route and also the shower button will certainly likewise need to be taken into consideration if a rapid or electrical shower system is being mounted.
    Make use of the direction guide provided with the shower unit to fit the shower control.Before suitable the pipelines that will supply the water to the shower system, it is essential to remove the water system. In order to safeguard the pipes, they must be given a waterproof covering as well as likewise fitted with isolating shutoffs. The pipes can then be hidden right into the wall and smudged over to neaten the general appearance.
    Fit the base tray, shower head, as well as fittings.
    Attach the primary shower control to the pipes that will certainly be providing the water (This may require a women screw thread adapter).
    Reconnect the water supply and also test the pipelines for any type of leaks, as some might need firm.
    If you are setting up an electrical shower, bear in mind to switch off the electricity supply prior to making any electric connections. As soon as these connections have actually been made (there must be guidance within the user's manual), the power supply can be changed back on.

    Readjusting Water Stress to Suit Your Shower


    The cold water tank can be lifted to a better height (occasionally as low as 150mm (6inches)) by installation a strong wood support underneath it - possibly made up of struts and blockboards. If you pick this option, the primary and circulation pipelines will additionally have to be elevated to meet the brand-new height of the storage tank.
    Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is selected, it must be linked right into the power supply in order to operate.

    Piping and also Drainage


    It is best to make use of 15mm size supply pipes, as well as make the go to the shower as short as well as straight as feasible so as to keep maximum pressure and also minimise warm loss. In addition, by reducing the use of elbows for pipe edges, you can lower the resistance in the flow of the water system. You can attain this by bending the pipes rather.

    Most Typical Mistakes


  • Breaching or overlooking local code limitations.

  • Making use of pipes that are as well little.

  • Affixing copper to galvanized without using a brass or dielectric fitting in between both.

  • Not using tape or pipeline compound at threaded joints.

  • Not leveling your fixtures when installing them.

  • Not setting up an air void filling for fixtures.

  • Cutting supply stub outs as well brief to mount the shutoff valves onto after the finished wall is in place.

  • Not correctly straightening tubes right into fittings or stop valves. (Requiring the nut onto the compression ring at an angle when the tubes goes to an angle will certainly cause a leak.).

  • When transforming the water back on in your house, constantly run the outside hose pipe valve or flush your bathrooms to hemorrhage dust and also air from the lines. This particles can create problems in your sink faucets and other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Install a One-Piece Shower Unit

    Do you like reading up on How to Install a Direct-to-Stud Shower Enclosure? Post a comment further down. We'd be glad to listen to your thoughts about this blog post. We are looking forward that you visit us again soon. If you liked our article plz make sure you remember to share it. We treasure reading our article about How to Build a Shower Enclosure for Your DIY Bathroom.




    Hire A Pro


    Leave a Reply

    Your email address will not be published. Required fields are marked *